@matyihi If you are looking for a while true loop, it's best to use the orange "is code running?" block. This block will check if you have stopped the code and keep the browser from crashing. Let us know if this helps!

Screen Shot 2021-10-13 at 3.20.54 PM.png

@stemkids For most of the projects you make in Blockly, the generated Python code does carry over to PyCharm. With controlling the drone using arrow keys, we have a separate Python lesson on how to do it. It will not behave exactly the same as the Blockly one because Blockly uses Javascript and can continuously read keyboard commands. In Python, you will be writing code to request one input at a time. It is possible to write a program in Python that works just like the Blockly program but it is more advanced and is not included in our lessons.

Here are some lessons that can help!
CoDrone Mini lesson on user input and making a remote - https://learn.robolink.com/lesson/user-input/
CoDrone Pro/Lite lesson on remote control - https://learn.robolink.com/lesson/codrone-python-user-input/

@stemkids For most of the projects you make in Blockly, the generated Python code does carry over to PyCharm. With controlling the drone using arrow keys, we have a separate Python lesson on how to do it. It will not behave exactly the same as the Blockly one because Blockly uses Javascript and can continuously read keyboard commands. In Python, you will be writing code to request one input at a time. It is possible to write a program in Python that works just like the Blockly program but it is more advanced and is not included in our lessons.

Here are some lessons that can help!
CoDrone Mini lesson on user input and making a remote - https://learn.robolink.com/lesson/user-input/
CoDrone Pro/Lite lesson on remote control - https://learn.robolink.com/lesson/codrone-python-user-input/

@admin said in Does CoDrone has a built-in camera?:

need the FPV camera

Ok I have send email ,, thank you

@brad-nielsen Full Python editing in the browser can be tricky, so it’s something we haven’t tackled yet. We well revisit it in the future, but no immediate plans at this time.

In the meantime, you can check out our Python pathway on Basecamp, which uses PyCharm to do the text-based coding.
It’s located here: https://learn.robolink.com/course/codrone-with-python/

Chromebooks will sometimes uninstall and undo the flag setup and driver install especially if you are using a guest account. Check your settings and make sure the flags enabled stays enabled even after shutting down.

For future questions, kindly shoot us an email directly at support@robolink.com.

@vangj Hello! We don't have the specs information of the motor. As for the replacement, if you can wait a week or so, we will get back to you with a solution.

On the top of the Smart Inventor board, there is a potentiometer which adjusts IR sensitivity. You can use a screwdriver to adjust it. Keep in mind it does not spin 360 degrees, so if you feel some resistance when adjusting the potentiometer you have reached the limit. See this diagram to locate the potentiometer: https://www.robolink.com/learn-smart-inventor-board/

For future questions, kindly send them directly to support@robolink.com.

@verdicchio Hi there,
I answered on the other thread about why you cannot pair. I also wanted to clear up that there are two Blockly coding platforms, one for CoDrone Lite/Pro and one for CoDrone Mini. Make sure you select the right one that matches with your product.

@verdicchio If you have tried to pair to CoDrone using Blockly without any device connected then it is likely that your device is not enabled with BLE (Bluetooth Low Energy). Since we have phased out Snap! and we are solely using our web-based coding software, you will need to have a BLE enabled device. Most recent laptops and Chromebooks will not be an issue but desktop computers and older laptops will not work.

Another update here! Snap! has been phased out so you will find our Block coding on Blockly, a web-based coding platform. If you want to see our lessons for all of the languages, check out our Basecamp website.

Hi, everyone!
I just wanted to update everyone on the new way to program CoDrone with Chromebooks. At the moment, Blockly programming with a Chromebook. Snap! has been phased out and we only use our web platform that runs on Chrome. Codebender is working on adding our board to their Arduino web editor, but in the meantime, there will be no text-based coding available on Chromebooks.

@sbrels4d CoDrone relies on the optical flow sensor and height sensors for its position. If you have some highly reflective floors or are flying in a dark room, it might be difficult for the drone to stabilize. If you have labeled the bottom of the drones, make sure nothing is obstructing the opening where the sensors are. Let us know if you have any questions! Feel free to attach pictures of the bottom of your drones and the classroom.

@aada2019 The input will correspond to how much battery power is provided to the motors. We do not have information on the exact voltage or rpm.

For reference, in a 5-second action comprised of a takeoff - hover - landing, I get the following data from the accelerometer.
0_1624327389359_6528281f-0335-4534-a880-600fbc2e0189-image.png

Thanks!

@jacksonpope2 I am not sure what you are referring to. The Rokit and CoDrone board are the same but the libraries are different. You can definitely program the board with both libraries but the Rokit library will not be able to program the drone.

@robolink_leila Fantastic, thank you Leila!

Hello @MrPowers What I can recommend is doing the following

Succesfully connect the Zumi to a wifi network using a computer. Connect the computer back to the wifi that Zumi is connected to. (example: switch from zumi1234 -- > mywifi) On your chrome browser go to the following link (example for zumi1234)
http://zumi1234.local/ instead of zumidashboard.ai If everything worked fine the dashboard should load and you can use your internet network while using Zumi.

You can also use the IP address of the zumi for step 3. The IP address is visible in the setting gear icon on the "zumidashboard".

Here is video we made
https://www.youtube.com/watch?v=tCbRsmbsOYk&ab_channel=RobolinkInc

Let me know if you would like to set up a video call to assist you.