Cannot upload programs to the controller
nag98k last edited by nag98k
I've doubled checked the wiring, made sure to hit the reset button, and went back over the instructions multiple times. When I unhook it from the usb and turn it on nothing happens, no lights or anything.
robolink_wes last edited by
Hello @nag98k! Welcome to the forum. The upload mode seems set up properly on the remote. You're getting a message at the end
Using Port : COM1which means you're most likely using the wrong Port number. Usually COM 1 is reserved for other devices.
Looks like your board manager is correct (
Rokit-SmartInventor-mega32_v2), so also make sure you go to Tools > Port, and see if a port appears when you plug in the remote in upload mode. That's the port you'll want to have selected. You'll want to look for COM7 or COM9 or something along those lines. The COM number depends on your hardware.
Give that a shot, and let us know if it helps!