As of September 2021, we have moved technical support to Robolink Help
Welcome to the Robolink Community forum!
You can post here to interact with others in the Robolink community. We're checking it weekly, and we'll respond to some messages. If you're looking for technical support, head over to Robolink Help.
starting to use Zumi, Getting PiCameraError: Camera is not enabled
-
starting to use Zumi, Getting PiCameraError: Camera is not enabled. Try running 'sudo raspi-config' and ensure that the camera has been enabled.
is ssh enabled? on Zumi? or what would you recommend to get into raspi-config
Regards, Geordy
-
@Geordy ,
If the build manual directions were not clear, let us know! We are always looking for feedback -
so figured it out the camera sensor was not connected to the pi cam board. missed that when building.
Regards, Geordy
-
Hi @Geordy ,
Please check that the camera cable is connected to the RaspberryPi. Sometimes it can become disconnected. On the camera itself, the cable may also pop off. Gently push these back into place and try again. Let me know if you have any more questions!