Welcome to the Robolink Community forum!
Will be good to have self diagnostic
-
Once assembled and connected with Wifi, it would be good to have a self diagnostic screen in the dashboard that tells all the sensors, cam etc are working correctly. If not give helpful links to correct it. For now I have built the Zumi. Having trouble with camera will check connectors etc.
-
@avizipi If you are connected to the internet, you can run the following command in a Jupyter Notebook cell to get the IP address:
!hostname -I
Hope this helps!
-
and also zumi's IP address.
-
@mirchiseth ,
We will take your feedback into consideration, thanks!For your camera issue, you may be seeing an error such as "Camera not enabled". Please check that the camera cable is connected to the RaspberryPi. Sometimes it can become disconnected. On the camera itself, the cable may also pop off. Gently push these back into place and try again. Let me know if you have any more questions!