Navigation

    Robolink logo
    • Register
    • Login
    • Search
    • [[global:header.categories]]
    • [[global:header.recent]]
    • [[global:header.tags]]
    • [[global:header.popular]]
    • [[global:header.users]]
    • [[global:header.groups]]
    As of September 2021, we have moved technical support to Robolink Help

    Welcome to the Robolink Community forum!

    You can post here to interact with others in the Robolink community. We're checking it weekly, and we'll respond to some messages. If you're looking for technical support, head over to Robolink Help.

    CoDrone Lite out of control

    CoDrone Troubleshooting
    2
    4
    4678
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rchan1030 last edited by

      Hi,

      We got problem in control the CoDrone Lite. We wrote a simple code as attached xml.

      Take off -> pitch -> yaw -> pitch -> landing

      However, it flied in different direction each time. !0_1519178862927_1227_test_capture.jpg

      You can check the video below,

      https://drive.google.com/open?id=13gwvtnxBL-BFA66z33GphEZrOI80SuIe
      https://drive.google.com/open?id=16DPgFPCnhqaBeIC_yVOBeFGtBUcIxhxb

      Hope you could give us an advice to solve the issue. Thanks!

      Regards,
      Richard

      1 Reply Last reply Reply Quote 1
      • robolink_wes
        robolink_wes last edited by

        Great! Let me know if you have any issues. One more thing: a good example of a good surface would be a thin carpeted floor with some kind of pattern on it.

        1 Reply Last reply Reply Quote 0
        • R
          rchan1030 @robolink_wes last edited by

          @robolink_wes Great! We will give it a try! Thanks!

          1 Reply Last reply Reply Quote 0
          • robolink_wes
            robolink_wes last edited by

            Hi @rchan1030, welcome to the Robolink Community! The video you sent and the drone's behavior indeed don't seem to match. @arnold_robolink will be able to answer even better than me, but it looks like the issue may be the reflective and blank floor you have. Oftentimes, when the floor is too reflective and doesn't have enough pattern, the drone isn't able to fix its position as well.

            One thing we'd recommend is making sure of find a surface that's more patterned and non-reflective. On that surface, try doing a calibration. You can do that calibration by following these steps: https://www.youtube.com/watch?v=emX3NaZEEDM

            Give that a try, and let us know if it improves the performance!

            R 1 Reply Last reply Reply Quote 0
            • First post
              Last post