Welcome to the Robolink Community forum!
Forward and back
-
Hi,
I have solved the camera issue. It seems that it cannot work on older Mac.
I still cannot solve the drive issue. I swapped the connectors and the same problem exists. left/right buttons are go front and back. Up/down buttons are go left and right.
Also, the sensors functions in the blocky is greyed. Is there a date for release?
please assist. thanks
-
@jy2010 Sure! Send your video to leila@robolink.com and I can take a look at it for you.
-
-
@jy2010 Could you attach a video showing all four commands? (Forward, backward, left, and right) This will tell us if you have a damaged motor. Thank you!
-
hi
it is a macbook pro 2015.
the drive still cannot work after i made the changes. btw, i have another zumi and that one is working. But this one is not. Please see the picture below. currently, in drive mode, left/right buttons are forward/backwards, up/down buttons are left/right. thanks

-
@jy2010 For more Blockly content the estimate is mid-summer!
-
@jy2010 Could you provide the specs for your computer? This will help us troubleshoot and make sure we can make the demo available for as many machines as possible. As for your motor issue, I think the motors themselves are put on backward. If you take a look at Step 1, the area where you attach the wheel is closer to the back of the board. Wires should be on the inner sides of the motors pointing to the back. If you need some more guidance, please attach a picture.