Sensor Data in Blockly

[Clarry290]

Hi there,

Im a STEM teacher in NZ and recently purchased a Co Drone lite to test. Is there a way to get sensor data / use the sensors in Blockly?

[robolink_leila]

@clarry290 Unfortunately we do not offer lessons for the use of that particular block with CoDrone Lite. However, we have made lessons for using the sensor blocks with our newest product, CoDrone Mini. Those lessons will be released by the end of this month. Although the Blockly environments are slightly different, you can use the CoDrone Mini lessons as a guide to get you started. I will let you know when those lessons are live. Thank you for your question!

[Clarry290]

@robolink_leila Thanks.
Still can't find how to use the 'get height from ground' sensor block? There is no resource for that?

[robolink_leila]

@Clarry290 We apologize for the delay! We have been updating all of our content to a new website so you might not have seen our sensor lessons. You will be able to get the battery, height, and gyro data in Blockly. You can check those out on Blockly here: https://robolink.com/blockly/.

Here is the link to our temporary Google Drive while we migrate to a new site.
CoDrone with Blockly: https://drive.google.com/drive/folders/1tTMjnsQEs4_gdylysRi7HmMwGR4437M3?usp=sharing

Let us know if you have any more questions!