Not pairing: No compatible devices found



  • Hello,
    When I try to pair my mini in blockly i get 'No compatible devices found'. I have the experimental features enabled in flags, and both the drone and remote are paired to each other, and the remote is plugged into my usb port. Is there a driver that I need to download, or something? And, if so, from where might I download it?
    J


  • administrators

    @jamie Great! The same driver will work for Python as well. If you have trouble, make sure to specify the port you are on (copied over from Blockly).



  • Thanks, Leila.
    I found and installed the Driver. Luckily, only 1 USB port appeared when I tried to Pair in Blockly.
    Now, it's off to Python, to see if Python likes that port.
    Thanks, again.
    Jamie


  • administrators

    Hi @jamie,
    There is a driver available if you click on "How to Pair" on the bottom left of Blockly. If you still can't connect with the driver installed, make sure you do the following:

    • Check that you are using the USB cable that came with CoDrone Mini or any data USB cable
    • Try another port on your device
    • Try disconnecting other devices that may be connected to your computer
    • Disconnect and reconnect drone and remote

    Let us know if this resolves the issue.

    0_1610750539946_Screen Shot 2021-01-15 at 2.36.21 PM.png


Log in to reply
 

Looks like your connection to Robolink community was lost, please wait while we try to reconnect.