Not pairing: No compatible devices found

[jamie]

Hello,
When I try to pair my mini in blockly i get 'No compatible devices found'. I have the experimental features enabled in flags, and both the drone and remote are paired to each other, and the remote is plugged into my usb port. Is there a driver that I need to download, or something? And, if so, from where might I download it?
J

[robolink_leila]

@jamie Great! The same driver will work for Python as well. If you have trouble, make sure to specify the port you are on (copied over from Blockly).

[jamie]

Thanks, Leila.
I found and installed the Driver. Luckily, only 1 USB port appeared when I tried to Pair in Blockly.
Now, it's off to Python, to see if Python likes that port.
Thanks, again.
Jamie

[robolink_leila]

Hi @jamie,
There is a driver available if you click on "How to Pair" on the bottom left of Blockly. If you still can't connect with the driver installed, make sure you do the following:

• Check that you are using the USB cable that came with CoDrone Mini or any data USB cable
• Try another port on your device
• Try disconnecting other devices that may be connected to your computer
• Disconnect and reconnect drone and remote

Let us know if this resolves the issue.