@robolink_leila What default program did we just upload? What is it supposed to do? The video didn't say.
As of September 2021, we have moved technical support to Robolink Help
Welcome to the Robolink Community forum!
You can post here to interact with others in the Robolink community. We're checking it weekly, and we'll respond to some messages. If you're looking for technical support, head over to Robolink Help.
L
Latest posts made by lallen128
-
RE: Trouble with Arduinoposted in CoDrone Troubleshooting
-
RE: Trouble with Arduinoposted in CoDrone Troubleshooting
@lallen128 It worked!! I have another question...can we use Blockly instead of Arduino? My son already knows how to use block coding from school.
-
RE: Trouble with Arduinoposted in CoDrone Troubleshooting
@robolink_leila We definitely did not have that selected. I just changed it and will try now.
-
RE: Trouble with Arduinoposted in CoDrone Troubleshooting
@lallen128 we have uninstalled and reinstalled Arduino, watched all the videos, read all the troubleshooting guides and absolutely cannot figure it out! very frustrated
-
Trouble with Arduinoposted in CoDrone Troubleshooting
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega168"
Sketch uses 7254 bytes (50%) of program storage space. Maximum is 14336 bytes.
Global variables use 937 bytes (91%) of dynamic memory, leaving 87 bytes for local variables. Maximum is 1024 bytes.
Low memory available, stability problems may occur.
An error occurred while uploading the sketch
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xf6
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xf6
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.