@beaucarnes ,
We do have a Zumi intersection underway! In the meantime, here are a few ideas:
If you have any ideas, please let us know!
@andjue24 We apologize for the missing part. Please fill out the Zumi Replacement Form with a link to this thread for our reference. We will get that out to you as soon as possible!
@JetForMe ,
I'll send these reports to the team and see if we can find a solution. In the meantime, try running in offline mode, or connect again later. Thank you for the feedback!
Hi @jetforme, the black part in the diagram is the switch. If it's to the left, it is in the off/charging position.
@tawnkramer ,
I've talked to @robolink_arnold and this has been logged. This board seems to be defective, we'll be in contact for a replacement.
@zumialgorithm Sorry about that! Please fill out this form to receive your replacement part. Let me know if you have any questions.
@gpvillamil It is an IR remote controller receiver but we have not integrated any code for it yet. We are planning on working on it soon. 
@andjue24 Unfortunately, Zumi cannot establish a connection to 5GHz networks. Were you able to connect to the 2.4GHz network?
@mga345 Do you mean that the dashboard never loaded? Could you attach a screenshot of your browser window? That would help us figure out the issue.
@shin Thank you for letting us know. Again, we apologize for the mix-up!
@cs From the images, I can see that the fourth connector is connected backward. Could you try again after rewiring? It may solve your issue. If it seems like all of the controls are inverted, you can refer to step 6 of the build guide to review the wiring.
@Sbanas I just encountered a similar issue with another customer. These suggestions may help:
If Zumi fails to connect the first time to the wifi network, do not click "try again". We found a bug that freezes the internet checker and you would never be able to get online after that. The best solution is to power off Zumi and try again after rebooting.
If that particular network isn't working, try with another network, preferably a network name that doesn't have any special characters like spaces or apostrophes. This network cannot be a 5Ghz network because it will not show up in the network list.
If you are still having issues, we're working on putting together a new SD card image to reflash the memory on the one that you received. Once we get that uploaded, I can send you the instructions or I can walk you through it.
I hope this helps in the meantime!
@indrajaal Yes, Drive Mode should be released in the next update. Code Mode will take some more time to get Blockly polished for users
thanks @ixmclean! @dstarkey22 The kit does come with some extra propellers in case you need some more to ensure that you have the proper orientation
@rkm On your device, go to your Wifi settings and find 'Petrone FPV XXXX'. Connect with the default password 12345678. Hope this helps!
Hi @waseityb ,
With CoDrone Lite, you can code with block coding (Blockly for Robolink) or Python (using Jupyter Notebook). You can also use the Petrone App available on App Store and Play Store to pair with CoDrone but it's only for flying and not for coding. Hope this answers your questions!
@martinexner Those features are projected to be released late this summer. I'll be sending an email shortly to follow up and answer any further questions.
@nohzen Not all IR sensors will be exactly the same so that behavior is very normal. Just set different thresholds for each IR sensor for detecting objects