Posts made by RStaceyMAT

Changing the LED color is a great idea, we will do that!

Also, another question about the bluetooth address - are we pulling an address generated by the software at that particular moment, or are we accessing the permanent address from the actual hardware? I ask because we have seen the addresses change when tested from one period to the next. Is there a way to get the permanent address so that they don't have to check every time?

To clarify, we have 12 drones. Those same 12 drones are used 3 class periods in a row by 3 different groups. We went in assuming that they would only have to do the PrintDroneAddress once. Might they have to do it each period?

Thanks,
Becky

Sorry, I was initializing the Serial monitor to br 9600 and using that, but I had to use the same br as the bluetooth connection, 15200. Got it! Can still use any helpful tips/tricks for working in a room full of drones.
Thanks,
Becky

Re: [CoDrone Pro No Remote Control Sync](No Communication with Mac)
Hello,
We are running 12 drones in a crowded classroom and having issues with students connecting to other groups' drones. I want to print out the address of the drones one at a time so that they can program to pair to their own drone every time. Unfortunately, when I use the PrintDroneAddress function, the Serial monitor shows me boxes, not an address that I can recognize. I've tried using both pair and AutoConnect. Can someone recommend how I should proceed to get the addresses of our 12 drones? (Or tell me how to fix the problem with the serial output?)
Thanks!
Becky