@robolink_carl
I am unable to load a video I get an error message stating that I do not have enough priviledges. there isn't mush to show on the video as once we have switched the board on we are unable to do anything else. The LEDs just contunue to flash through the sequence of programmes.
Welcome to the Robolink Community forum!
Latest posts made by VJ753
-
RE: Flashing LEDs
-
RE: Flashing LEDs
with the line follower we did adjust the potentiometer.
We have tried turning on in all different rooms with varying light including in the dark. Each time the LEDs flash.
-
Flashing LEDs
Hi
We got the Rokit Smart for our son for Christmas and started with the line follower. We turned it on and the LEDs kept flashing through the sequence of programs. We reset the board which worked, however were not successful with getting the robot to follow our lines.
We decided to try the mouse robot. Once built we switched on the board and had the same issue of flashing LEDs. The boards was rest again and our mouse robot was successful. However when we came back to the robot the next day and switched it on we had flashing LEDs again. Only this time resetting the board hasn’t solved the problem (which surely we shouldn’t have to do every time anyway ). I have also adjusted the IR sensitivity which didn’t help.
Please help